Select Page

Why Coupling Grease?
Ample lubrication is crucial for satisfactory gear coupling operation. Gear Coupling Grease is specifically intended for gear coupling applications to increase coupling existence when drastically cutting down maintenance time. Its substantial viscosity base oil and tackifier mix to help keep the grease in place and stop separation and it is in full compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in shade and manufactured that has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to large centrifugal forces typically observed in couplings. Bearing or general objective greases are likely to separate and get rid of effectiveness resulting from high centrifugal forces on the a variety of elements at higher rotational speeds. These large centrifugal forces encountered in couplings separate the base oil through the thickeners. Hefty thickeners, which have no lubrication attributes, accumulate within the gear tooth mesh location leading to premature coupling failure. Gear Coupling Grease is created to hugely resistant to centrifugal separation of the oil and thickener, which allows the lubricant to become made use of for a relatively lengthy period of time.
One of several secrets and techniques to your success of Gear Coupling Grease is the variable consistency through the entire operating cycle in the application. The consistency of our gear coupling grease improvements using the operating ailments. Functioning from the lubricant beneath actual service problems triggers the grease to come to be semi-fluid, functionally solash lubricating the put on surfaces of your coupling. Because the grease cools, it returns to your original consistency, therefore preventing leakage.
Gear Coupling Grease is accessible from stock in 14 oz. cartridges, 1 lb. and five lb. cans.
Functions
Minimizing of coupling dress in
Resistance to water washing
Corrosion and rust safety
Substantial load carrying abilities
Extended relubrication frequency
Use at temperatures as much as 325° F
Staying in place below large speeds
Resistance to centrifugal separation
Reduction in down time & servicing cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and one. This grease is specially formulated with a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.