DUMP TRAILER Electrical power UNIT-DOUBLE ACTING
This energy unit features a electrical power up energy down circuit with load holding on each A & B ports. A stress compensatred movement management can be extra to circuit to regulate the decent pace in the cylinder.
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean the many hydraulic components concerned before set up of the power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which should also be clean and totally free of impurities. N46 hydraulic oil is advised.
4. The energy unit need to be mounted horizontally.
5. Check the oil degree within the tank immediately after the initial working from the electrical power unit.
6. Oil changing is required right after the preliminary one hundred operation hrs, afterwards once each 3000 hours.
DUMP TRAILER Energy UNIT- SINGLE ACTING
This electrical power unit features a energy up gravity down circuit. Start the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve is often offered if required. Also a pressure compen sated flow control can be extra to your circuit to control the descent pace of your cylinder.
Remark: Please talk to our sales engineer for the different pump displacement, motor electrical power or tank capacity.
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all of the hydraulic components concerned in advance of installation of the energy unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst,which should really also be clean and no cost of impurities.N46 hydraulic oil is advised.
four. The electrical power unit ought to be mounted horizontally.
five. Check the oil level from the tank after the preliminary running of the electrical power unit.
6. Oil altering is needed right after the first a hundred operation hrs, afterwards the moment every 3000 hours.