Select Page

TF Style Flanges
Model TF flanges are made from the identical high-strength cast iron because the S flanges, but are intended to accommodate the worldwide common Taper Lock bushing for effortless set up and elimination
TF Type flanges make it possible for for mounting the bushing within the front (hub) side on the flange
TF flanges can be found in sizes 6 as a result of sixteen and may be made use of with any kind of sleeve as pictured on page SF-5
TR Type Flanges
TR flanges are very similar to the TF design, but enable for the Taper Lock Bushing to be mounted and removed from
the reverse or serration side of the flange
The restricted torque ratings of the Taper Lock Bushings enable TR flanges to only be applied with EPDM or Neoprene sleeves
Various bushing sizes are applied, so they have distinctive optimum bores compared to the TF flanges
Sizes 6 through 16 are available
Taper-Lock Bushings
The business common taper lock bushing is usually a split design permitting a compression fit on the flange to your shaft without the need of set screws
The straightforward design and style makes the installation and elimination uncomplicated even though the 8° taper grips tight and provides excellent concentricity
A Reduced level of inventory is usually attained due to the many other electrical power transmission parts that use Taper Lock Bushings like: sheaves, sprockets, and pulleys
does not offer the Taper-Lock Bushings themselves as they’re extensively out there from other manufacturers