Select Page

General Description
This electrical power unit attributes a long term magnet motor with a power up gravity down circuit. Activate the start out solenoid to begin the motor to lift the machine. The lowing movement is activated from the solenoid valve with all the decreasing pace managed through the strain compensated flow control valve. Products of this series is usually widely used in the sector of logistic devices this kind of as fork lift, mini lift table, and so on.
Specific Notes
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean each of the hydraulic parts concerned in advance of set up of the energy unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which must also be clean and absolutely free of impurities. N46 hydraulic oil is encouraged.
four. This power unit is made to be mounted vertically.
5. Check the oil level inside the tank after the 1st star of the energy unit.
six. Oil transforming is required following the preliminary 100 operation hrs,afterwards the moment every single 3000 hours.
7. More pump sizes and tank sizes are avaiable upon request.